Ventilation and stirring of stainless steel tanks in Yantai
Release time:
2020-04-21
The main body of stainless steel tons is generally a main round cylinder made of stainless steel plates. Its volume is 1m3 to hundreds of m3. In the design and processing, it should be paid to strict structure, reasonable, and industry for microbial fermentation. Yantai stainless steel tanks need to pass plenty of air to meet the requirements of microbial oxygen demand, the larger the amount of air passing ...
The main body of stainless steel tons is generally a main round cylinder made of stainless steel plates. Its volume is 1m3 to hundreds of m3. In the design and processing, it should be paid to strict structure, reasonable, and industry for microbial fermentation. Yantai stainless steel tanks need to pass plenty of air to meet the requirements of microbial oxygen demand, the larger the amount of air passing ...
The stainless steel ton can needs to pass the abundant air to meet the requirements of microorganisms. Therefore, the larger the amount of air passing, the more oxygen obtaining microorganisms. Increase is beneficial to the oxygen in the air of microorganisms. However, the oxygen in the air is passed to the microorganism through the medium, and the transmission rate is largely determined to determine the mass of the gas -liquid phase, which means that the size of the bubbles and the stop time of the bubbles. The more plenty of oxygen.
Stir the rust -steel fermentation tank as much as possible to obtain sufficient oxygen and nutrients in the pots in the tank. In addition, the good stirring is conducive to the heat generated by the microbial fermentation process to pass to the cooling tube and the cooling of the fermentation tank. On the surface, this is the reason why the stainless and stirred stir -stirring tanks are generally used in biochemical engineering.
Related news